Basic Info.
Mathematical Model
Linear
Function
Automatic Control, Protection, Monitoring, Measurement
Certification
ISO: 9001, CE
Product Description
Various module types
Kinco-K5 series PLCs comprise of CPU modules and expansion modules. Kinco-K5 provides about 20 kinds of models to meet various applications. CPU modules integrate with a certain number of I/O points on body. If I/O points are not enough for application, user could connect up to 10 expansion modules with up to 200 points to meet most automation applications.
Integrated DC24V Sensor Supply
CPU modules provides DC24V power supply (Terminal
name: VO+, VO-), with maximum current 300mA or
500mA. It can supply DC24V for the connected text
dispaly panel, HMI, as well as DI points.
Requirement on Application Environment
Climatic conditions, electrical service conditions, mechanical service conditions and so on comply with IEC61131-2 standard
Transport and storage |
Climatic conditions | Temperature | Temperature -40ºC~+70ºC |
Relative humidity | 10%~95%, non-condesing |
Atmospheric Pressure | Correspond to altitude 0~3000m |
Mechanical conditions | Free drop | Away from 1m height drop to cement floor for 5 times with transportation package |
Operation |
Climatic conditions | Temperature | Opening device with natural ventilation, ambient temperature: -10~55ºC |
Relative humidity | 10%~95%, non-condensing |
Atmospheric pressure | Altitude below 2000m |
Pollution degree | Applicable to pollution degree 2 |
Mechanical service conditions | Vibrations | 5 < f < 8.4Hz, random amplitude: 3.5mm displacement, constant amplitude: 1.75mm displacement 8.4 < f < 150, random amplitude: 1.0g acceleration, constant amplitude: 0.5g acceleration |
Shock | Half-sine, 15g peak, 11ms duration, six shocks in each direction per axis. |
Electromagnetic compatibility (EMC) | Electrostatic discharge | Air: 8kV, Contact: 4kV, Performance criteria B |
Surge | AC supply: 2KV CM, 1KV DM DC supply: 0.5KV CM, 0.5KV DM I/O and communication port: 1KV CM Performance criteria B |
Fast transient bursts | Power coupling: 2KV, 5KHz I/O and communication port: 1KV, 5KHz Performance criteria B |
Voltage Dips and interruptions | AC supply, At 50Hz,0%voltage for 1 period, 40%voltage for 10 periods, 70%voltage for 20 periods. Performance criteria A |
Radiofrequency electromagnetic field | 80~1000 MHz,l0V/m, modulate by 1KHz sine wave. Performance criteria A |
Protection class | Dust and water proof | IP20 |
CE Certification |
LVD | Test Standard: Safety requirements of EN 61131-2:2007 |
EMC | Test Standard: Clause 8,9 &10 of EN61131-2:2007 |
Kinco-K5 series PLCs are upgraded products of K3 series.
Specially, K506EA-30AT CPU module, integrated with
analog I/O on body, pulse output, high-speed counter, is a kind of versatile micro integrated PLC (Programmable Logic Controller), and can fully meet requirements of small devices and process control.
Kinco-K5 combines with MT4000 HMI, CD/FD/JD servo driver and inverter to provider users with easy automation solutions. Name Order no. Description |
CPU module |
CPU504EX | K504EX-14AT | AC85-265V power supply, DI 8*DC24V, DO 6*DC24V. 2 serial communication ports (1*RS232, 1*RS485), up to 4 expansion modules connectable. |
K504EX-14AR | AC85-265V power supply, DI 8*DC24V, DO 6*Relay. 2 serial communication ports (1*RS232, 1*RS485), up to 4 expansion modules connectable. |
K504EX-14DT | DC20.4-28.8V power supply, DI8*DC24V, DO6*DC24V, 2 serial communication ports (1*RS232, 1*RS485), up to 4 expansion modules connectable. |
K504EX-14DR | DC20.4-28.8V power supply, DI8*DC24V, DO6*Relay. 2 serial communication ports (1*RS232, 1*RS485), up to 4 expansion modules connectable. |
CPU506 | K506-24AT | AC85-265V power supply, DI 14*DC24V, DO 10*DC24V. 3 serial communication ports (1*RS232, 2*RS485), up to 12 expansion modules connectable. |
K506-24AR | AC85-265V power supply, DI 14*DC24V, DO 10* Relay. 3 serial communication ports(1*RS232, 2*RS485), up to 10 expansion modules connectable. |
K506-24DT | DC20.4-28.8V power supply, DI 14*DC24V, DO 10*DC24V. 3 serial communication ports(1*RS232, 2*RS485). , up to 12 expansion modules connectable. |
K506-24DR | DC20.4-28.8V power supply, DI 14*DC24V, DO 10*Relay. 3 serial communication ports(1*RS232, 2*RS485), up to 10 expansion modules connectable. |
CPU506EA | K506EA-30AT | AC85-265V power supply, DI 14*DC24V, DO 10*DC24V, AI 4*IV, AO 2*IV. 3 serial communication ports(1*RS232, 2*RS485), up to 12 expansion modules connectable. |
K506EA-30DT | DC20.4-28.8V power supply, DI 14*DC24V, DO 10*DC24V, AI 4*IV, AO 2*IV. 3 serial communication ports(1*RS232, 2*RS485), up to 10 expansion modules connectable. |
CPU508 | K508-40AT | AC85-265V power supply, DI 24*DC24V, DO 16*DC24V. 3 serial communication ports(1*RS232, 2*RS485), up to 12 expansion modules connectable. |
K508-40AX | AC85-265V power supply, DI 24*DC24V, DO 4*DC24V+12*Relay. 3 serial communication ports(1*RS232, 2*RS485), up to 10 expansion modules connectable. |
K508-40AR | AC85-265V power supply, DI 24*DC24V, DO 16*Relay. 3 serial communication ports(1*RS232, 2*RS485), up to 12 expansion modules connectable. |
K508-40DT | DC20.4-28.8V power supply, DI 24*DC24V, DO 16*DC24V. 3 serial communication ports(1*RS232, 2*RS485), up to 10 expansion modules connectable. |
K508-40DR | DC20.4-28.8V power supply, DI 24*DC24V, DO 16*Relay. 3 serial communication ports(1*RS232, 2*RS485), up to 12 expansion modules connectable. |
Name Order no. Description |
Expansion I/O module |
PM521 | K521-08DX | DI 8*DC24V |
K521-16DX | DI 16*DC24V |
PM522 | K522-08XR | DO 8*relay |
K522-16XR | DO 16*relay |
K522-08DT | DO 8*DC24V |
K522-16DT | DO 16*DC24V |
PM523 | K523-16DR | DI 8*DC24V,DO 8*relay |
K523-08DR | DI 4*DC24V,DO 4*relay |
K523-16DT | DI 8*DC24V,DO 8*DC24V |
K523-08DT | DI 4*DC24V,DO 4*DC24V |
PM531 | K531-04IV | 4 analog input channels,4-20mA/1-5V/0-20mA/0-10V |
K531-04RD | PT100, PT1000, Cu50, Resistor |
K531-04TC | 4 thermocouple input channels, internal/external compensation selectable, J type, K type, E type, S type |
PM532 | K532-02IV | 2 analog output channels,4-20mA/1-5V/0-20mA/0-10V |
PM533 | K533-04IV | 2 analog input channels,4-20mA/1-5V/0-20mA/0-10V 2 analog output channels,4-20mA/1-5V/0-20mA/0-10V |
Expansion function module |
SM541 | K541 | CAN communication expansion module, supports CANopen master and CAN free protocol. |
Power supplier module |
PS580 | K580 | Input voltage:AC85~265V;output rated current:5V 1A/24V 250mA |
Front view
The following diagram is the front view of a CPU.
The following table describes main technical data of CPU model. | CPU506 |
Built-in I/O and Communication |
Digital channel | 14*DI/10*DO |
Max. expansion modules | 10 |
Communication Port | 3(PORT0, PORT1, PORT2) |
PORT0 is RS232,PORT1 andPORT2 are RS485. PORT0 support the special programming protocol, Modbus RTU protocol (as a slave) and free-protocol communication mode. PORT1 andPORT2 support the special programming protocol, Modbus RTU protocol (as a slave or master) and free-protocol communication mode. |
High-speed counters Single phase Two phase | 2 2, max.60KHz 2, max.20KHz |
High-speed pulse output | 2,max. 200KHz.(For 200KHz, load resistance must be less than 1.5 KΩ). |
I/O Interrupts | 4 channel , can be set as rising or falling edge interrupts |
memory area |
Max. User program | 4K instructions |
User Data | M area: 1K bytes; V area: 4K bytes |
DI mapping area | 32 bytes |
DO mapping area | 32 bytes |
AI mapping area | 64 bytes |
AO mapping area | 64 bytes |
Data Backup | FRAM, 448 bytes |
Retentive Ranges | 4K bytes, lithium cell as backup power, 3 years at normal temperature. |
Others |
Timers | 256 totally: 1ms time-base: 4 ; 10ms time-base: 16; 100ms time-base: 236 |
Timed interrupts | 2 with 0.1 ms resolution. |
Counters | 256, (retained by lithium cell) |
Real-time clock | Yes, deviation less than 2 min/month at 25°C |
DC24V Sensor Supply | 300mA |
Environmental ConditionTransport and storage |
Ambient conditions | temperature | -40 --- +70 °C |
| relative humidity | 10%~95%, no condensation |
| Altitude | Up to 3000 m |
Mechanical conditions | Free falls | With manufacturer's original package, 5 times falling from 1m height to concrete ground. |
Normal Operation |
Ambient conditions | air temperature | Open equipment : -10 --- +55°C; Enclosed equipment: -10 --- +40°C |
| relative humidity | 10%~95%, no condensation |
| Altitude | Up to 2000 m |
| Pollution degree | Suitable pollution degree 2. |
Mechanical conditions | Sinusoidal vibrations | 5<f<8.4Hz, Occasional: 3.5mmamplitude; Continuous: 1.75mmmplitude. 8.4<f<150, Occasional: 1.0gacceleration; Continuous: 0.5gacceleration. |
| Shock | half-sine , 15g, 11 ms, half-sine, ach axes 6 times |
Electromagnetic compatibility (EMC) | Electrostatic discharge | ±4kV Contact, ±8kV Air. Performance Level: B |
| High energy surge | a.c. main power:2KV CM, 1KV DM; d.c. main power:0.5KV CM, 0.5KV DM; I/Os and Communication port:1KVCM. Performance Level: B |
| Fast transient bursts | main power: 2KV, 5KHz. I/Os and Communication port: 1KV, 5KHz. Performance Level: B |
| Voltage drops and interruptions | a.c. power supply: at 50Hz, 0% voltage for 1 period; 40% voltage for 10 periods; 75% voltage for 20 periods. Performance criteria A. |
ProtectionLevel | | IP20 |
K506-24AR wiring diagram
K506-24AT wiring diagram
Address:
Building 1, No. 6 Langshan 1st Road, Hi-Tech Park North, Nanshan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Kinco is one of the leading suppliers of Manufacturing Smart Solutions in China. We focus on the development, production and selling of automation standard products and intelligent hardware products.
We devote to help manufacturing digitalization by using IIoT technology in order to realize the web collaboration of smart commerce.
From 1996, Kinco relied on a full line of automation standard products including Human Machine Interface (HMI), Servo System, Stepper System, Programmable Logic Controller (PLC) and Variable Frequency Drive (VFD), etc, to become the leading brand in China.
We has provided complete smart solutions for global industrial automation equipment manufacturer, promoting Chinese automation smart solutions worldwide.
In the future, Kinco will continue to focus on industrial automation and intelligent manufacturing, and provide Smart Solution focusing on the industry for logistics automation, service robots, medical equipment, professional drones, 3C machine tools, clothing, food and other industries to create value for customers.
Kinco continuously invests into a large amount of resources in the research and development of automation technology platform and information technology platform. The company has 4 R&D facilities in Shanghai, Shenzhen, Chengdu and Changzhou.
Kinco has automation technology not just covering control, drive, communication, human-machine interaction and mechanic-electric integration, Information technology including MES, WMS, and software technology of SaaS.
Ehavioural philosophy:
To be righteous and sincere, sunny and transparent, to promote good from the heart and eliminate evil, to believe in the true goodness and beauty, and to share the company′s vision mission and values.
To set a big ambition, to take responsibility, to help the growth of BUCO with our own efforts, to create greater value for the industry, to make greater contributions to society, and to realize our own value in this way.
The essence of business is to achieve customer success. We strive to make friends with customers, establish a deep link between heart and mind, always feel the silent call of customers, and actively work to help customers grow and progress.
We pursue the continuous improvement of our own spiritual quality and working ability, and take it as our responsibility to help our subordinates to improve, communicate sincerely and cooperate with each other, so that every working partner can grow and progress.
Treating work as an exercise in self-discipline, and becoming increasingly sophisticated. To understand the meaning behind the work and to create the best quality of work by being the only one.
To be driven by solving customers′ problems and achieving a good experience for them, to research new technologies, new products and new services, to strive for leadership and to ensure quality.